Gunsmithing Degree

Trinidad State College
Gunsmithing Department
600 Prospect Street 
Campus Box 331
Trinidad, CO 81082
800-621-8752

---

• Bob Campbell
  Gunsmithing Faculty
  Robert.Campbell@sy61258.com
• Ryan Newport
  Gunsmithing Faculty
  Ryan.Newport@sy61258.com
• Logan Schmit
  Gunsmithing Faculty 
  Logan.Schmit@sy61258.com
• Samuel Weaver
  Department Chair
  Samuel.Weaver@sy61258.com

---

IMPORTANT:
Acceptance into the Gunsmithing Program is based on information provided by the applicant and the results of an interview. After the applicant submits the required information to Trinidad State College the Gunsmithing department will review the information and offer an interview to applicants who are qualified to enter the program. After completing the interview the applicant will be informed whether or not they have been accepted into the program.

If the class the applicant has chosen is full the applicant will be placed on a waiting list to replace any students who may back out before the program begins. Any students who are still on the waiting list after the lass begins will be placed into the next semester.

Gunsmithing AAS Degree

73 credit hours

Required General Education Courses
MAT 107 or above - 3
English 115, or 121 - 3
Nine credit hours from the following: Science, Social and
Behavior Science, Business, Accounting or Speech
TOTAL general education requirements - 15

Required Gunsmithing Elective Courses
Approved GUS elective courses to be selected from those courses marked * on Gunsmithing Program Course Catalog Descriptions (listed below).
TOTAL Gunsmithing Elective Requirements - 3

---

---

---

REQUIRED ELECTIVE COURSES

---

Gunsmithing Certificate

53 credit hours

Required Gunsmithing Elective Courses
Approved GUS elective courses to be selected from those courses marked * on Gunsmithing Program 
Catalog Descriptions (listed below).
TOTAL Gunsmithing Elective Requirements - 3

---

---

---

REQUIRED ELECTIVE COURSES

---

NRA Summer School’s Gunsmithing Technician Certificate - 16 credit hours

• Click here for all the details.

Tuition and Fees

• Trinidad State College Tuition and Fees
• Gunsmithing Course Fees
  • Approximately $750 for the Associate Degree program

Room and Board

• Single Room with 19 meal plan
   Approximately $3964 per semester
• Double Room with 19 meal plan
  $3450 per semester
  

Approximate Tool Cost

This is the approximate cost of tools needed for class for minimum quality tools purchased through the bookstore.

• First semester $2,800
• Second semester $1,500
• Third semester $1,500
• Fourth semester $500
  (These figures are estimates only and are subject to change.)

Required tools and materials for Gunsmithing AAS or Certificate programs

The list of required tools and supplies can be found at here.
This list indicates prices and part numbers in effect at the Trinidad State College Bookstore. These prices are subject to change. These tools are available from many sources, in addition to Bookstore.

• Recommended Tool Suppliers

  • Bookstore
    Trinidad State College
    (719) 846-5610
  • Brownells, Inc.
    200 South Front St.
    Montezuma, Iowa 50171
    (515) 623-5401
  • Jantz Supply
    309 West Main St.
    PO Box 584
    Davis, Oklahoma 73030-0584
    1-800-351-8900
  • J&L Industrial Supply
    31800 Industrial Rd
    Livonia, Michigan 48151-1820
    1-800-521-9520
  • MSC Industrial Supply Co
    http://www.mscdirect.com
    1-800-645-7270

Gunsmithing Course Catalog Descriptions

GUS 100
Orientation & Firearms Safety
.5 Credit
The first part of this course is an orientation into the gunsmithing program. The second part of the course will introduce the student to the basic principles of firearms safety. Completing students will receive an NRA home firearm safety certificate of completion.

GUS 102
Introduction to Firearms
2 Credits
Explores the history of firearms and ammunition, firearms design and the function of modern firearms.
CO/PREREQUISITE: GUS 100

GUS 110
Firearms Bench Metal
5 Credits
This course emphasizes shop safety and hand work, including: the proper use of measuring and hand tools, layout, drilling, sawing, filing, soldering, silver soldering, forging, heat treatment and hand polishing.
PREREQUISITE: GUS 100

GUS 112
Firearms Machine Shop I
5 Credits
Introduces theory and practice of shop safety, metalworking lathe, and milling machine operations. Students will demonstrate proper use of machine tools while making specialized gunsmithing tools.
CO/PREREQUISITE: GUS 100

GUS 119
Stockmaking I
5 Credits
Introduces stockmaking techniques for a bolt action rifle from semi-inletted blanks. The course will cover inletting the barrel and trigger guard, glass bedding, installing grip cap, recoil pad, fore-end tip, swivels, shaping, sanding and finishing.
PREREQUISITE: GUS 127, GUS 135, GUS 139

GUS 127
Firearms Machine Shop II
4 Credits
Continues the theory and practice of shop safety, metalworking lathe, and milling machine operations. Students will demonstrate proper use of machine tools while making specialized gunsmithing tools and fitting, chambering, and contouring a barrel for a bolt action rifle.
PREREQUISITE: GUS 112

GUS 135
Firearms Conversion
5 Credits
Examines various techniques for conversion of military rifle actions into customized sporter rifle actions. Bolt handles, safeties, iron sights, scope mounts, adjustable triggers, and trigger guard contouring and other custom conversions and accessories will be included.
PREREQUISITES: GUS 100, GUS 102, GUS 110, AND GUS 112

GUS 136
Firearms Metal Finishing
2 Credits
Focuses on the skills necessary to perform firearms bluing and parkerizing techniques. Topics include necessary equipment, chemical mixing procedures, and safety as they apply to hot caustic bluing, rust bluing, parkerizing and metal preparation.
PREREQUISITES: GUS 100 AND GUS 110

GUS 139
Stock Duplication
2 Credits
Introduces gunstock woods, stock layout, and basic stock duplicating machine operations. Students will sharpen chisels, design and cut a semi-inletted gunstock.
PREREQUISITES: GUS 100 AND GUS 110

GUS 147
Firearms Repair I
5 Credits
Explores firearms repair theory and practice. Topics include necessary tools, design, function, takedown, troubleshooting, assembly and repair of selected handguns, shotguns, and rifles.
PREREQUISITES: GUS 100, GUS 102, GUS 110 AND GUS 112

GUS 153
Ballistics and Handloading*
2 Credits
Course includes the discussion of interior ballistics, exterior ballistics, components and their manufacture, reloading equipment, rifle, handgun, and shot shell loading, bullet casting, and safety.

GUS 162
Gunstock Checkering*
2 Credits
Construction and use of checkering cradles, layout templates and tools. Layout and operation of hand and electric checkering tools.

GUS 201
Tools & Fixtures
2 Credits
Study and manufacture of tools: Milling Cutters, Taps, Dies and Reamers. Study and measurement of screw threads. Projects will include milling cutters, reamers, taps, and dies.
PREREQUISITE: GUS 112

GUS 205
Firearms Machine Shop III
4 Credits
Continues the study of machine tool operation with special emphasis on gunsmithing procedures. Course work includes safety, milling, lathe, and advanced barrel fitting and chambering.
PREREQUISITE: GUS 127

GUS 240
Shotgunsmithing*
2 Credits
This course is designed to give the advanced gunsmithing student the theories and principles of the post popular shotgun modifications. Emphasis will be placed on back boring, choke tubes, forcing cones, shotgun beads, and dent removal.
PREREQUISITES: GUS 110, GUS 112

GUS 245
Stockmaking II
5 Credits
Explores advanced stockmaking techniques for one and two piece gunstocks of both wood and synthetic materials. Techniques in glass bedding, gun fitting, installation of custom hardware and finishing techniques will also be studied.
PREREQUISITES: GUS 140

GUS 247
Firearms Repair II
8 Credits
Provides an advanced gunsmithing course in firearms repair theory and practice. Topics include design, function, takedown, troubleshooting, assembly and repair of selected shotguns, rifles, and handguns. Also included is the use of specialized tools and fixtures.
PREREQUISITE: GUS 147

GUS 250
Competitive Rifles*
2 Credits
This course will include the study of necessary modifications to convert the standard issue AR-15, into a match grade firearm.
PREREQUISITES: GUS 100, GUS 112

GUS 251 
Bolt Rifle Accuracy/Blueprinting*
2 Credits
This course will include the study of necessary modifications to convert the standard bolt action rifle into a varmint, bench rest, or match grade firearm.
PREREQUISITES: GUS 100, GUS 112

GUS 265
Comprehensive Skills Evaluation
.5 Credit
Provides a comprehensive evaluation of skills and knowledge attained after students have completed the Gunsmithing Program curriculum.
PREREQUISITE: Successful completion of all required GUS Classes

GUS 268
Custom Pistolsmithing*
3 Credits
This course is designed to teach the advanced gunsmithing student the principles necessary to modify a Colt, Government Model .45 auto (or its copies) into a competition firearm, as used in various shooting sports. Emphasis is on safety, reliability, accuracy and the fabrication and use of specialized tools, jigs, and fixtures.
PREREQUISITES: GUS 100, GUS 110, AND GUS 105

GUS 269
Custom Revolversmithing*
3 Credits
This course is designed to teach the advanced gunsmithing student the principles necessary to modify a revolver into a competition firearm. Emphasis is on safety, reliability, accuracy, and use of specialized tools, jigs and fixtures.
PREREQUISITES: GUS 100, GUS 110, GUS 105